The GX-4816 waterjet has a cutting envelope measuring 48 feet by 16 feet – one of the largest in the country! Other notable features of the G-4816 include 5 feet of Z-travel, a high rail gantry with a safety line for operators to use when performing maintenance, and a system of multiple AROS hoppers to remove abrasive from the massive waterjet tank. As one of the largest waterjets ever installed in North America, the GX-4816 could be considered the most impressive WARDJet project to date.

Toggle Imperial or Metric
Spec Detail
Footprint 60' x 29'
One Carriage X-Y Cutting Area 50' x 15.8'
Two Carriage X-Y Cutting Area 50' x 13.3'
Software Ikuhlu, WARDCAM, IGEMS
Power Requirements (Gantry Only) 230V, 30 amps, 3 Phase
Air Requirements 80 psi, 2 cfm
Max Number of Z-Carriages 4
Bulk Feed Hopper 2200 lb pressurized
Drive Mechanism Helical rack and split pinion (X & Y). Ball screw driven Z.
Linear Positional Accuracy ± 0.003" per axis
Repeatability ± 0.001" per axis
Speed 0.01 in/min - 500 in/min based on 230 volts

See it in Action

Also to Consider

Additional Information

Save on taxes with Section 179

Save on your TaxesDeduct up to $1M with Section 179

Learn More

Waterjets Made In USA

Made in AmericaManufactured in the USA

Learn More

What can waterjets cut?
Wood, Stone, Composites, Sheet Metal, Foam, Food, Glass and much, much more...
How do we keep our prices down?
This has been achieved by pioneering an innovative business model specifically aimed at helping our customers. Simply put, we cut out all of the middlemen and high cost centers that do not directly contribute to the building of a great waterjet system.
Why the extra foot of travel?
Often, when adding a second cutting head, the distance the first cutting head can move is reduced to make space for the additional head. We added the extra foot of travel to "park" the second head when not in use. This allows you to have full range of the first cutting head when the second is not in use.
Why the independent carriages?
The benefit of having separate cutting heads on completely independent Z-Carriages is the freedom the operator gets to place the heads as close or as far apart as desired within seconds. Each Z-Carriage has its own motor driven height adjustment, and can be configured to have an independent height sensor.
How thick can waterjet cut?
Waterjet can cut 10" thick stainless steel without too much difficulty, but can cut even thicker material (18" thick Titanium) if the application demands it.

Start Cutting!

Get Solutions. Start tailoring your waterjet today!

Call us at 1.330.677.9100 or Schedule a Live Test Cut

That's right - Watch remotely as your part is being cut! Get A Test Cut